Channel Master CM-5020 Specifications Page 12
- Page / 68
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
6
Basic
When releasing the replay button the replay function will take over the audio system and
start to replay the last XX seconds of data received on any channel. The time when the traffic
was received and the channel on which it was received is displayed during replay.
Volume control can be used on the replay data to adjust sound pressure in audio devices.
During replay “— —” is shown in the channel display, to indicate that listening on the live
receive signal is disabled in this situation (as well as recording is disabled). If a signal is
received on the working channel while replay is activated, this is indicated in the lower left
corner of the replay window.
Replay is interrupted when:
• Pressing , or
• Pressing PTT
• Receiving any message in the information/message display
Recorded voice data will not survive power-down of any kind
.
1.11 Dimming
To adjust the light intensity the dim button is pressed.
While the dim button is pressed the intensity is changing. Releasing the dim
button will maintain the current light intensity.
A renewed pressing of the dim button will change the direction of the light intensity change.
If the VHF is dimmed to zero, any key press will wake up the light to a minimum visible at
night. Active text in the information/message display might prevent dimming to zero.
It is possible to reduce illumination to zero. If you press a key in this state the light will
illuminate to the lowest illuminated state for 5 seconds, where after it will return to the zero
illumination state. If a message is shown on the screen while dimming is set to zero, the
illumination is adjusted to the lowest nonzero value.
1.12 Contrast
Contrast of the information/message display (and thereby optimizing the vertical viewing
angle) can be adjusted initially by entering the Display Contrast menu. Use the arrows to
adjust contrast. The contrast will be set simultaneously during adjustment.
0544
- SAILOR RT5022 VHF DSC 1
- SAILOR RT5020 VHF DSC Duplex 1
- Introduction 3
- Training Information 4
- Quick DSC distress call 5
- (only for emergency use) 5
- Mayday procedure 5
- Your VHF at a glance 6
- (RT5020/RT5022) 6
- Contents 7
- 1.1 Powering VHF 9
- 1.5 Speaker volume 10
- 1.6 Earpiece volume 10
- 1.7 Squelch 10
- Activating replay 11
- 1.11 Dimming 12
- 1.12 Contrast 12
- 2 Basic DSC operations 13
- 2.3 Transmitting DSC Calls 14
- 2.4 Call a ship station 14
- 2.5 Call a shore station 14
- 2.7 Call a group of ships 14
- 2.8 Create emergency calls 15
- 2.9 DSC call log 15
- 3 Your VHF in detail 16
- 3.4 Setting channel mode 17
- 3.5 Private channels 17
- 3.6 Duplex channels 17
- 3.8 Transmitter power 18
- 3.9 Channel scanning 19
- 3.10 Creating scan tables 19
- 4 DSC operations in detail 20
- 4.2 Group MMSI number 21
- 4.4 Working channel 22
- 4.5 Contact list 22
- 4.5.2 Show contact 23
- 4.5.3 Adding a new contact 23
- 4.6.1 Special calls 24
- 4.6.3 Automatic channel shift 25
- 4.7.1 DSC transmission 25
- Transmit Station Call 26
- MMSI: 001234567 26
- <Menu/back 26
- 4.8.1 Idle display 27
- 4.8.3 Language 27
- 4.8.4 Privacy talk mode 28
- 4.10 Automatic conditions 29
- 4.11.1 Radio software release 30
- 5 Errors and warnings 31
- Fuse 15A ATO 32
- 5.2.2 Self-test 32
- 5.2.3 GPS 33
- 5.2.4 Accessory connection 33
- 5.2.5 DSC routine testing 33
- 5.2.6 Missing MMSI 34
- 5.2.7 Radio time 34
- 5.2.8 Channel not free 34
- 5.2.9 Device failure 34
- 6 Menu tree 35
- 7 Optional functional devices 37
- 7.1.2 Operation 38
- 7.1.3 ON/OFF 38
- 7.1.4 Channel selection 38
- 7.1.5 Volume 38
- 7.1.6 Squelch 39
- 7.1.7 Dimming 39
- 7.1.8 Receiving a DSC call 39
- 7.1.9 Muting alarms 40
- 7.1.10 Transmitter power 40
- 7.1.11 Replay 40
- 7.2.1 Distress initiation 41
- 7.3 Printer 42
- 8.1 International channels 43
- 8.2 US channels 44
- 8.3 BI channels 45
- 8.4 CA channels 46
- VHF with mounting bracket 47
- Mounting option Drilling plan 48
- Drilling plan 48
- Handset for transceiver 49
- Installation 50
- 9.2 Compass safe distance 53
- Connection box board 639121 55
- Extension board 639123 55
- Cable connection diagram 57
- Interfaces 58
- Sparc II Connections 58
- 9.5.1 Antennas 61
- 9.5.2 RX/TX antenna 61
- 9.5.3 DSC antenna 62
- 10 Technical specifications 63
- Thrane & Thrane A/S 68
- [email protected] 68
- www.thrane.com 68
- B5022GB0 Issue: L /09 02 68
Related products and manuals for Television antennas Channel Master CM-5020
(39 pages)
(40 pages)
(36 pages)© 2020, manymanuals.com. All rights reserved. | 1.016 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals